Table of Contents
Advertisement
Auto Image Rotation
ADVANCED OPERATION GUIDE
Automatically rotates the image when the sizes of the original and the
loaded paper matches but the orientations are different. The images will be
rotated 90° counter-clockwise prior to copying.
NOTE:
To set Auto Image Rotation as the default mode, refer to Auto
Image Rotation on page 6-31.
The procedure for making copies using Auto Image Rotation is explained
below.
1
Place the originals on the platen.
2
Press the Copy key.
3
Press [Advanced Setup] and then [Auto Image Rotation].
4
Press [On] to select
Auto Image
Rotation.
5
Press [OK].
6
Press the Start key to start copying.
Ready to copy.
Auto Image Rotation
When original and paper source size are the
same, but their orientation is different,
rotate image 90 degrees when copying.
Press [OK] to display
the image.
Add Shortcut
Status
Copying Functions
Copies
Off
On
Cancel
OK
10/5/2006
1-49
1
10:10
Advertisement
Table of Contents
