Print Density; Send/Box Density Adjust; Density Mode - Kyocera Mita KM-3050 Advanced Operation Manual

System Menu

Print Density

Send/Box Density Adjust

6-64
Adjust print density. Adjustment can be made in 5 levels.
Use the procedure below to adjust the print density.
1
Press the System Menu key.
2
Press [ ], [Adjustment/Maintenance] and [Change] of Print Density.
3
Press [1] - [5]
(Lighter-Darker) to
adjust density.
4
Press [OK].
Adjust scan density when sending or storing the data in Document Box.
Adjustment can be made in 7 levels both in auto and manual density
modes.
1
Press the System Menu key.
2
Press [ ], [Adjustment/Maintenance] and [Next] of Send/Box Density
Adjust..
3
Press [Change] of Auto for auto density mode or of Manual for manual

density mode.

4
Press [-3] - [+3]
(Lighter-Darker) to
adjust density.
5
Press [OK].
Adjustment/Maintenance - Print Density
Adjust density for all printing jobs,
including copies.
Lighter
1 2 3
Status
Adjustment/Maintenance - Auto
Adjust the default transmission/stored document density
for automatic mode.
Lighter Normal
-3 -2 -1 0
Status
ADVANCED OPERATION GUIDE
Darker
4 5
Cancel OK
10/5/2006 10:10
Darker
+1 +2 +3
Cancel OK
10/5/2006 10:10