Table of Contents
Advertisement
Sending Functions
Background Density Adjustment
2-24
Lightens the background of the colored original when it is too dark.
NOTE:
You cannot adjust the background density if you selected
[Monochrome] in Color Selection (see page 2-25).
Use the procedure below to set the background density when sending
scanned images.
1
Place the originals on the platen.
2
Press the Send key.
3
Press [Color/Image] and then [Background Density Adj.].
4
Press [On], and
press [1] to [5]
(Lighter - Darker) to
adjust the density.
5
Press [OK].
6
Specify the destination, and press the Start key to start sending.
Ready to send.
Place original.
Background Density Adj.
Off
On
Press [OK] to display
the image.
Add Shortcut
Status
ADVANCED OPERATION GUIDE
Destination
Background
Lighter
Darker
1
2
3
4
5
Cancel
OK
10/5/2006
1
10:10
Advertisement
Table of Contents
