Emulation - Kyocera Mita KM-3050 Advanced Operation Manual

Printer

Emulation

3-4
Select the emulation for operating this machine by commands oriented to
other types of printers.
Selection of emulation
The printer can emulate Line Printer, IBM Proprinter, DIABLO 630, EPSON
LQ-850, PCL 6, KC-GL, KPDL and KPDL (Auto).
Use the procedure below to select the emulation.
1
Press the System Menu Key.
2
Press [Printer] > [Change] in Emulation.
3
Select the desired

emulation.

NOTE:
If you selected [KPDL (Auto)], you should also select an
alternative emulation, as described in Setting of Alternative Emulation
below.
When you have selected [KPDL] or [KPDL (Auto)], set KPDL Error Report,
too. (Refer to page 3-5)
When you have selected [KC-GL], set the print size and pen, too. (Refer to
page 3-7)
4
Press [OK].
5
Press the Power key, and after confirming that the Power key/indicator
and memory indicator have turned off, turn the main power off and on.
Printer - Emulation
Set emulation options.
Line Printer IBM DIABLO 630
Proprinter
KPDL KPDL(Auto)
PCL6
Status
ADVANCED OPERATION GUIDE
EPSON
LQ-850
KC-GL
Cancel OK
10/5/2006 10:10