Dialing With A One-Touch Key; Printing Out A One-Touch Key List - Kyocera KM-2540 Operation Manual

Ready for fax transmission.
Enter Destination.
Dest
One touch
destinat.
Abbrev. Delayed TX 8½×11"
Address Duplex Original
book TX Size
Basic Application
Ready for fax transmission.
Press start key to transmit
Dest
.1 ABC.
ABC.
Address TX
Abbrev.
book setting
Basic Application
2-20

Dialing With a One-Touch Key

You can dial a fax number by simply pressing the one-touch key under
which that number is registered.
1
2
3
4
Normal
Original De
Image Mo
Register Print Report
5
6
Register Print Report

Printing Out a One-Touch Key List

Print out the list in order to check the information (destination name and
fax number, etc.) registered under one-touch keys.
Note To select the conditions related to transmitting documents,
such as the resolution and density, refer to pages 2-5 and 2-6.
Prior to operation, check the message display to make sure that
the touch panel is in the initial mode for fax operation. (Refer to
What is the Initial Mode? on page 1-9.)
If you want to cancel the procedure part way through, press the
Reset key. The touch panel will return to the initial mode settings.
If the operation involves the transmission of documents, set the
documents you want to transmit.
If you want to change the transmission conditions, such as the
resolution and density, press the [TX setting] key.
If you do NOT want to change the current conditions, go directly to
step 5.
Press the key that corresponds to the desired item and change the
information as desired. (To change each transmission condition,
refer to pages 2-5 and 2-6.)
Once you are finished changing transmission conditions, press the
[One touch destinat.] key.
Press the one-touch key under which the desired fax number is
registered.
Press the Start key.
The transmission operation will begin automatically.
Note Any time you set documents on the platen, after each
document is scanned you will need to select whether or not
you want to scan more pages into memory. (Refer to page 2-
8.)
Note If there are no one-touch keys registered in this fax, a One-
Touch Key List will not be printed out.
Prior to operation, check the message display to make sure that
the touch panel is in the initial mode for fax operation. (Refer to
What is the Initial Mode? on page 1-9.)
If you want to cancel the procedure part way through, press the
Reset key. The touch panel will return to the initial mode settings.
Fax Operation (Basic)