Modifying Or Deleting Permit Fax Numbers - Kyocera KM-2540 Operation Manual

Register in TX/RX Restriction list.
Permit FAX numbers 2.
Detail contents
Enter using # key.
(MAX. 20 digits)
_.
Register in TX/RX Restriction list.
Permit FAX No.
#01 12345678 .
#02
#03
Register in TX/RX Restriction list.
Permit FAX numbers 1.
Contents change/del.
12345678.
Change
contents
Register in TX/RX Restriction list.
Permit FAX numbers 1.
Detail contents
Enter using # key.
(MAX. 20 digits)
12345678_ .
Various Settings and Registration
5
Use the numeric keys to enter the desired Permit Fax Number.
(Maximum 20 digits)
Ba
6
Delete
Press the [OK] key. The message display will return to the same
screen as was displayed in step 4. If you want to continue registering
other Permit Fax Numbers, repeat steps 4 through 6. If you are
finished registering Permit Fax Numbers, press the Reset key.

Modifying or Deleting Permit Fax Numbers

Note If you want to cancel the procedure part way through, press
the Reset key. The touch panel will return to the initial mode
settings.
1
Perform steps 1 through 3 of Registering New Permit Fax Numbers
on page 6-28.
2
Press the key which displays the Permit Fax Number you want to
modify or delete.
#04 0612345.
#05 5555.
3
If you want to delete the registered Permit Fax Number, press the
[Delete] key and then go to the next step. If you want to modify the
registered information, press the [Change contents] key and then go
Ba
directly to step 5.
Delete
> Deleting a Permit Fax Number
4
Press the [Yes] key.
The message display will return to the same screen as was
displayed in step 2. If you are finished deleting Permit Fax Numbers,
press the Reset key.
> Modifying information
5
Press the Stop/Clear key to delete the old number and then enter
the new Permit Fax Number, or use the [ ] and/or [ ] keys to move
the cursor to a desired location and reenter the number as desired.
Ba
Pressing the [Delete] key will delete the number directly above the
cursor.
6
Press the [OK] key. The message display will return to the same
Delete
screen as was displayed in step 2. Once you are finished modifying
and/or deleting Permit Fax Numbers, press the Reset key.
Note You can use the [ ] and/or [ ] keys to move the cursor
to a desired location, and you can clear the entered number by
pressing the [Delete] key.
6-29