Automatically Switching Between The Fax And A Telephone (Auto Fax/Tel Switching) - Kyocera KM-2540 Operation Manual

x transmission.
ign destination.
TX
setting
tion Register Print Report
Various Settings and Registration
Automatically Switching Between the Fax and
a Telephone (Auto FAX/TEL Switching)
This reception mode is convenient for using a separately purchased
telephone together with this fax on a single telephone line. If an incoming
call is from a fax machine, fax reception will start automatically. If the call
is from a telephone, the fax will ring to let you know that you should
answer.
Note Auto FAX/TEL Switching is only possible if a separately
purchased telephone is connected to this fax machine.
Even if you do not answer the telephone, the calling party will
incur telephone charges after the phone rings a predetermined
number of times.
Reception flow
Preparation
Refer to Selecting the Automatic Reception Mode (Receive Mode
Memory usage: .0%
setting) on page 6-17, and select Auto Fax/Tel. SW.
JUN-06-2007 16:00
Dest.
Make sure that Auto RX is displayed on the basic fax screen. If it is not,
check
press the reception mode select key and then press the [Auto RX] key.
Re-dial
On-hook
Memory TX
Auto RX
1
When a call comes in, the telephone will ring. However, if '0' is
selected for Auto Fax/Tel SW under the Number of Rings setting, the
ringing will not be audible.
2
Answering the call...
Note The telephone will ring only once in the metric version
models. In the inch version models, you can set the number of
times the telephone will ring. (Refer to Setting the Number of
Rings [Auto Fax Reception] (Number of Rings setting) on
page 6-12.)
6-3