Preparing The Next Documents During Another Communication (Standby Transmission) - Kyocera KM-2540 Operation Manual

Ready for fax transmission.
Press start key to transmit
Dest 1234_.
Delete Pause
One touch
destinat.
8½×11"
Abbrev. Delayed TX
Address Duplex Original
book TX Size
Basic Application
Register
Fax Operation (Advanced)
Preparing the Next Documents During
Another Communication (Standby
Transmission)
Standby Transmission refers to the process of preparing documents for
transmission while the fax is occupied with another communication.
If, during that communication, the documents you want to transmit are
set and the destination fax number is entered, those documents will be
automatically transmitted once the current communication has been
completed.
Since, with this fax, it is possible to schedule a Standby Transmission
and then have your documents given priority whenever the fax is
currently sending to multiple communications or there are other
communications already scheduled in memory ahead of yours, Standby
Transmission is thus convenient for sending urgent documents quickly
during communications which normally take an extended amount of
time, such as Broadcast Transmission and Polling Reception.
Note A maximum of 50 communications (including any
combination of Standby Transmissions, communications that use
the timer and Interrupt Transmissions) can be scheduled at one
time.
You can also designate each of the various types of fax
communication available in this fax such as Broadcast
Transmission as a Standby Transmission.
If you want to cancel the procedure part way through, press the
Reset key. The touch panel will return to the initial mode settings.
1
Set the documents you want to transmit in the Document Processor
or on the platen.
2
Enter the destination fax number.
Space Subadd.
Normal R
Original De
Image Mo
Print Report
3
Press the Start key. The documents will be scanned into memory.
Note You can enter the fax number(s) using the numeric
keys, abbreviated numbers, one-touch keys, group dial keys,
program keys or the address book. Chain dial keys can be
used as well.
Note If the fax is in the Direct Feed Transmission mode, the
documents will remain in the Document Processor or on the
platen waiting for the transmitting operation to begin.
Once the other communication is completed, the transmission
operation will begin automatically.
3-5