Kyocera KM-2540 Operation Manual page 114

Registering item option screen.
Select item for register.
Fax
Dial Box
Forwarding
Location TX/RX Remote SW
Info. Restrict. dial
Date Remote
& Time Test ID
Basic Application
Register the dial.
Group dial 0004.
Contents change/del.
Name GDE
003.
Change
contents
Register the dial.
Group dial 0004.
Add/change/del des.
0001. ABC
0003. FREE + 123456.
1234567.
03.
3456.
1/1.
3-54
2
3
Encryption
key
Register Print Report
4
Ba
Delete
> Deleting a group dial key
5
> Modifying registered information
6
Deleting destinations
7
Ba
03.
8
1/1.
Adding destinations
9
Memory usage: .0%
JUN-06-2007 16:00
Back Close
Add
Change
Delete
Press the [Dial] key.
Press the speed-dial key (group dial key) containing the information
you want to modify or delete.
Note If that key is not displayed, use the [ ] and/or [ ] cursor
keys to switch to the screen that displays the key that you
want.
If you want to delete the registered one-touch key, press the [Delete]
key and then go to the next step. If you want to modify the registered
information, press the [Change contents] key and then go directly to
step 6.
Press the [Yes] key.
The message display will return to the same screen as was
displayed in step 3.
If you want to continue deleting other group dial keys, repeat steps 3
through 5. If you are finished deleting group dial keys, press the
Reset key.
If you want to change the destination fax number(s), press the [
key and go to the next step. If you want to modify the abbreviated
number (the displayed number of the speed-dial key under which the
group dial key is registered), press the [Abbr. #] key and then go
directly to step 16. If you want to modify any other basic information,
press the key that corresponds to that information and refer to
Registering New Group Dial Keys on page 3-52.
Press the destination that you want to delete until it is highlighted.
Multiple selections are possible. If the destination you want to delete
is not displayed, use the [ ] and/or [ ] cursor keys to switch to the
screen that displays the destination that you want.
To delete the selected destination(s), press the [Delete] key and then
the [Yes] key.
Press the [Add] key.
Fax Operation (Advanced)
]