Kyocera KM-2540 Operation Manual page 172

Ready for fax transmission.
Place the original & assign destination.
Dest
Address TX
Abbrev.
book setting
Basic Application
Registering item option screen.
Select item for register.
Fax
Dial Box
Forwarding
Location TX/RX Remote SW
Info. Restrict. dial
Date Remote
& Time Test ID
Basic Application
Register in TX/RX Restriction list.
Item option
Permit Permit
FAX No. ID No.
Register in TX/RX Restriction list.
Permit List
#01 0101.
#02 0202.
#03
6-30
Registering New Permit IDs
1
Register Print Report
2
Encryption
key
Register Print Report
3
Reject
FAX No.
4
5
#04
6
#05 5555.
Modifying or Deleting Permit IDs
1
Note You can register up to 5 numbers as Permit IDs in this fax.
If you want to cancel the procedure part way through, press the
Reset key. The touch panel will return to the initial mode settings.
Press the [Register] key. The Register screen will appear.
Press the [TX/RX Restrict.] key.
Press the [Permit ID No.] key.
Press an unregistered key. The information will be displayed for all
keys that have already been registered.
Use the numeric keys to enter the desired 4-digit Permit ID. If you
want to change the entered number, use the [ ] and/or [ ] keys to
move the cursor to the desired location.
Press the [Confirm] key. The message display will return to the same
screen as was displayed in step 4. If you want to continue registering
other Permit IDs, repeat steps 4 through 6. If you are finished
registering Permit IDs, press the Reset key.
Note If you want to cancel the procedure part way through, press
the Reset key. The touch panel will return to the initial mode
settings.
Perform steps 1 through 3 of Registering New Permit IDs on page 6-
30.
Various Settings and Registration