Various Settings And Registration - Kyocera KM-2540 Operation Manual

Various Settings and Registration

6 Various Settings and
Registration
This section contains explanations on making settings and
registering information.
Automatically Switching Between the Fax and a Telephone
(Auto FAX/TEL Switching)
Automatically Switching Between the Fax and an
Answering Machine (TAD Reception)
Using Different Fax and Telephone Numbers (D.R.D.
Reception) [Available in inch versions only]
Turning Print Out of Each Report ON/OFF (Print Report
setting)
Turning the Bulletin Board ON/OFF (Bulletin Board setting) 6-11
Setting the Number of Rings [Auto Fax Reception] (Number
of Rings setting)
Making Volume Settings (Volume setting)
Setting the Number of Redial Attempts (Number of Redials
setting)
Setting the Document Size for Scanning from the
Document Processor (Scan from DP setting)
Setting the Default Transmission Mode (TX Mode/Default
setting)
Selecting the Automatic Reception Mode (Receive Mode
setting)
Turning Reception Date & Time Print Out ON/OFF (RX
Date/Time setting)
Selecting the Paper Feed Selection Mode (Fax Paper
Feeding Tray setting)
Turning Manual Paper Feed ON/OFF (MP Tray setting)
Turning Duplex Reception ON/OFF (Duplex RX setting)
Turning 2 in 1 Reception ON/OFF (2 in 1 RX setting)
Turning Remote Diagnosis ON/OFF (Remote Diagnosis
setting)
Registering the Remote Test ID (Remote Test ID setting)
Receiving faxes at the same size or a reduced size
(Reception Size setting)
Restricting Communication To/From Specific Destinations
(TX/RX Restriction)
Registering New Permit Fax Numbers ................................. 6-28
Modifying or Deleting Permit Fax Numbers.......................... 6-29
Registering New Permit IDs ................................................. 6-30
Modifying or Deleting Permit IDs .......................................... 6-30
6-3
6-5
6-7
6-9
6-12
6-13
6-14
6-15
6-16
6-17
6-18
6-19
6-21
6-22
6-23
6-24
6-25
6-26
6-27
6-1