Preparations; Designating The Type Of Phone Line Being Used (Line Type Setting) (Inch Version Only) - Kyocera KM-2540 Operation Manual

System Menu / Counter
System Menu
Copy FAX
Default Default
Machine
Default
System Menu / Counter
Line Type
Tone line
(DTMF)
Pulse line
(10 PPS)
Fax Operation (Names of Parts / Preparations / Features and Functions of this Fax)

Preparations

When using the fax functions of this machine for the first time after
purchasing your Fax System, perform the procedures as explained in
Designating the Type of Phone Line Being Used (Line Type setting) (Inch
version only) through Setting the Current Date and Time (Date & Time
setting).
Designating the Type of Phone Line Being Used (Line
Type setting) (Inch version only)
Set the type of phone line here to correspond to the type of telephone
service that you are using. BE SURE the type of phone line you select
here is correct because, if the setting is incorrect, fax communication will
be impossible.
1
2
3
Job
Language
Accoun
MP Tray
Setting
Register Print
Orig. Size Report
4
5
Ba
6
Note If your service representative performs these settings during
set-up of your Fax System, there is no further need for you to
perform these procedures.
Note Prior to operation, check the message display to make sure
that the touch panel is in the initial mode for fax operation. (Refer
to What is the Initial Mode? on page 1-9.)
If you want to cancel the procedure part way through, press the
Reset key. The touch panel will return to the initial mode screen.
Press the System Menu/Counter key. The System Menu / Counter
screen will appear.
Press the [FAX Default] key.
Make sure that Line Type is highlighted and press the [Change #]
key.
Press either the [Tone Line (DTMF)] key or the [Pulse Line (10 PPS)]
key, as appropriate.
Press the [Close] key. The message display will return to the same
screen as was displayed in step 3.
If you are finished making settings, press the Reset key to return to
the initial mode.
1-5