Kyocera KM-2540 Operation Manual page 64

Ready for fax transmission.
Duplex TX
Cover page
Off Yes
On No
Scanning
Direction of
document feed
Scanning
Direction of
document feed
3-4
6
Ba
Top binding
On
Off
7
Printout at the
destination fax
Printout at the
destination fax
8
9
Select whether or not you want to include a 1-sided cover page with
the transmission by pressing either the [Yes] key or the [No] key, as
appropriate.
• If you want to send a 1-sided document as a cover sheet to the
rest of the 2-sided documents, select [Yes]. In this case, the fax
will transmit the documents WITHOUT scanning the back side of
the first page.
• If you want to transmit the 2-sided documents WITHOUT a
cover page, select [No].
Select whether or not you want the image on the back side of the
documents to be inverted during transmission to match the
orientation of the front side by pressing either the [On] key (invert
rear images) or the [Off] key (do NOT invert images), as appropriate.
• If you transmit documents as shown in the illustration at right,
select [On]. The fax will then invert the image of the rear side of
each document in memory 180°.
• If you transmit documents as shown in the illustration at right,
select [Off].
Press the [Close] key.
Press the Start key. The documents will be scanned into memory
and the transmission operation will begin automatically.
Fax Operation (Advanced)