Sending 2-Sided Documents (Duplex Transmission) - Kyocera KM-2540 Operation Manual

Fax system (p) operation guide rev-1
Hide thumbs Also See for KM-2540:
Table of Contents

Advertisement

Ready for fax transmission.
Press start key to transmit
Dest
1234_.
Delete
Pause
One touch
destinat.
8½×11"
Abbrev.
Delayed TX
Address
Duplex
Original
book
TX
Size
Basic
Application
Register
Ready for fax transmission.
Press start key to transmit
Dest
1234_.
Delete
Pause
One touch
destinat.
8½×11"
Abbrev.
Delayed TX
Address
Duplex
Original
book
TX
Size
Basic
Application
Register
Fax Operation (Advanced)
Sending 2-Sided Documents (Duplex
Transmission)
Duplex Transmission enables the transmission of both the front and
back sides of duplex (2-sided) documents. Duplex transmission is
always accomplished by setting the documents you want to transmit in
the Document Processor and scanning them into memory in the Memory
Transmission mode.
During the set-up procedure for a Duplex Transmission, it is possible to
select whether or not you want to include a separate cover page (a 1-
sided page) with the transmission as well as whether the image on the
back side of the documents needs to be inverted during transmission to
match the orientation of the image on the front side.
It is also possible to use Duplex Transmission capabilities in combination
with each of the other various types of fax communication available in
this fax. The following method explains the procedure for sending duplex
documents to a single destination.
Note Prior to performing Duplex Transmission, you must select
[Standard size] when setting the document size for scanning from
the Document Processor. (Refer to Setting the Document Size for
Scanning from the Document Processor (Scan from DP setting) on
page 6-15.)
If you want to cancel the procedure part way through, press the
Reset key. The touch panel will return to the initial mode settings.
1
Set the 2-sided documents in the Document Processor.
2
Enter the destination fax number.
Space
Subadd.
Normal
R
Original
De
Image
Mo
3
Press the [TX setting] key.
Print Report
4
Press the [Duplex TX] key.
5
Press the [On] key to enable Duplex Transmission.
Space
Subadd.
Normal
R
Original
De
Image
Mo
Print Report
Note If you entered the fax number using the numeric keys,
go to step 4.
If you entered the fax number using abbreviated numbers,
one-touch keys, group dial keys, program keys or chain dial
keys, go to the next step.
3-3

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Km-304025403040

Table of Contents