Kyocera KM-2540 Operation Manual page 103

Registering item option screen.
Select item for register.
Fax
Dial Box
Forwarding
Location TX/RX Remote SW
Info. Restrict. dial
Date Remote
& Time Test ID
Basic Application Register
Register box
Box type
Subaddress Subaddress
conf. box relay box
Register box
Subaddress relay box
3333.
8888.
0715.
Register box
Subaddress relay box 02.
Subaddress/password
Enter using # key.
Subaddress 0000. ( 4 digits)
Password 0000. ( 4 digits)
Register box
Subaddress relay box 02.
Enter Destination.
Dest .1 ABC
Delete
ABC
FREE
Address Next
Abbrev.
book destinat.
Register box
Subaddress relay box 02.
Local print/return
Print Here Return report
On On
Off Off
Fax Operation (Advanced)
2
Press the [Box] key. F-Code Relay Box registration is now possible.
Encryption
key
Print Report
3
Press the [Subaddress relay box] key.
Encryption
box
4
Press an unregistered key.
5
Use the numeric keys to enter the subaddress 4-digit that you want
to use for this F-Code Relay Box.
6
Ba
Press the [Password] key and enter the 4-digit F-Code password
that you want to use for this F-Code Relay Box.
7
Press the [Next] key.
8
Repeat steps 1 and 2 below until all of the final destination fax
numbers are registered. (Max. 300 destinations)
1
Pause Space
2
9
Press the [Finish dest. Set] ([Dest. set]) key.
10
Select whether or not you want the received documents to be printed
out at your fax (press the [On] key to have them printed and the [Off]
key to stop print out), and whether or not you want send a
Ba
Transmission Report regarding the results of the final transmissions
to the initial transmitting station (press the [On] key to send a report
and the [Off] key to not send a report.).
11
Press the [Next] key.
Note The subaddress will be displayed for all keys that have
already been registered.
Note The password can include any combination of the
numerals 0 - 9 and the symbols * and #.
Enter the fax number of a final destination.
Note You can use the numeric keys, abbreviated
numbers, one-touch keys and group dial keys to enter the
fax number. Chain dial keys can be used as well.
If you entered the fax number with the numeric keys, press the
[Next destinat.] ([Next dest.]) key.
3-43