Dialing The Destination With A Registered Number And The Numeric Keys (Chain Dial Keys); Dialing The Destination With A Registered Number And The; Registering New Chain Dial Keys - Kyocera KM-2540 Operation Manual

Ready for fax transmission.
Place the original & assign destination.
Dest
Address TX
Abbrev.
book setting
Basic Application
Registering item option screen.
Select item for register.
Fax
Dial Box
Forwarding
Location TX/RX Remote SW
Info. Restrict. dial
Date Remote
& Time Test ID
Basic Application
Register the dial.
Register dial #
Set dial for registration.
3-12
Dialing the Destination With A Registered
Number and the Numeric Keys (Chain Dial
Keys)
If you register a chain dial number under a speed-dial key in advance,
that speed-dial key will function as a chain dial key and the chain dial key
can be used to enter the initial portion of the other party's fax number.
Example: If the number [212] is registered under a speed-dial key
(which then functions as a chain dial key) and you want to dial the
number 212-XX-XXXX, press the key under which [212] is registered
and enter the rest of the number with the numeric keys.

Registering New Chain Dial Keys

1
Register Print Report
2
Encryption
key
Register Print Report
3
1/167.
Note You can only use chain dial keys once in a dialing sequence:
to enter the initial digits of the other party's fax number.
You can use chain dial keys when entering destination fax
numbers in each of the various types of fax communication
available in this fax such as Broadcast Transmission.
You CANNOT use chain dial keys in combination with group dial
keys.
Note A maximum of 1000 speed-dial keys can be registered as
chain dial keys (minus the number of registered one-touch, group
dial and program keys).
If you want to cancel the procedure part way through, press the
Reset key. The touch panel will return to the initial mode settings.
Press the [Register] key. The Register screen will appear.
Press the [Dial] key. The touch panel will switch to dial registration.
Press an unregistered speed-dial key on the touch panel.
Note If there are no unregistered speed-dial keys displayed,
use the [ ] and/or [ ] cursor keys to switch to a screen that
displays an unregistered key.
Fax Operation (Advanced)