Dialing With A One-Touch Key - Kyocera KM-3035 Operation Manual

Dialing With a One-Touch Key

You can dial a fax number by simply pressing the one-touch key
under which that number is registered.
* To select the conditions related to transmitting documents, such
as the resolution and contrast, refer to pages 2-3 and 2-4.
* Prior to operation, check the message display to make sure that
the touch panel is in the initial mode for fax operation.
(Refer to "What is the "Initial Mode"?" on page 1-11.)
* If you want to cancel the procedure part way through, press the
Reset key. The touch panel will return to the initial mode
settings.
1
If the operation involves the transmission of documents,
set the documents you want to transmit.
2
If you want to change the transmission conditions, such
as the resolution and contrast, press the "TX setting" key.
If you do NOT want to change the current conditions, go
directly to step 5.
3
Press the key that corresponds to the desired item and
change the information as desired. (To change each
transmission condition, refer to pages 2-3 and 2-4.)
4
Once you are finished changing transmission conditions,
press the "One touch destinat." key.
(inch)
(metric)
Section 2 Fax Operation (Basic Use)
5
Press the one-touch key under which the desired fax
number is registered.
(inch)
(metric)
6
Press the Start key.
The transmission operation will begin automatically.
* Any time you set documents on the platen, after each
document is scanned you will need to select whether or
not you want to scan more pages into memory. (Refer to
page 2-6.)
2-17