Checking The Result Of Receptions - Kyocera KM-2540 Operation Manual

TX result on LCD.
Contents confirmation
Doc #: 024. Send
03.
OCT-10 16:19. TX No.of pages:
Ready for fax transmission.
Place the original & assign destination.
Dest
Address TX
Abbrev.
book setting
Basic Application Register
Option screen
Select item.
Sub.conf. Reserved
TX Polling
box input TX status
Sub.conf. TX result
RX Polling
box output on LCD
Print encr RX result
data box on LCD
Basic Application Register
Rx report on display.
Contents confirmation
028. Service center
023. Service center
022. Service center
018. Service center
Rx report on display.
Contents confirmation
Doc #: 028. Encryption RX
Service center
OCT-10 17:32. RX No.of pages:
Managing Information About Your Fax Communications
4
5
000. Result: STOP
1/9.

Checking the Result of Receptions

Information for up to 50 of the most recent fax receptions can be
checked in the message display.
1
Print Report
2
Print Report
3
OCT-10 17:32 OK
OCT-10 15:50 OK
OCT-10 15:47 STOP
OCT-10 14:27 OK
4
5
001. Result: OK
1/9.
Pressing the [ ] cursor key will display the next previous
transmission and pressing the [ ] cursor key will change the display
back towards the most recent transmission. Once you have finished
checking the desired information, press the [Close] key. The touch
panel will return to displaying the list of transmissions.
Once you have finished checking the desired information, press the
Reset key to return to the initial mode.
Note If you want to cancel the procedure part way through, press
the Reset key. The touch panel will return to the initial mode
settings.
Press the [Application] key. The Application screen will appear.
Press the [RX result on LCD] ([Rx result display]) key. The most
recent receptions will be displayed in a list.
If 5 or more receptions have taken place, press the [ ] cursor key or
the [ ] cursor key to scroll up and down through those receptions.
To verify even more detailed information for a particular reception,
select the desired reception and press the [Details] key.
Pressing the [ ] cursor key will display the next previous reception
and pressing the [ ] cursor key will change the display back
towards the most recent reception. Once you have finished checking
the desired information, press the [Close] key. The touch panel will
return to displaying the list of receptions.
Once you have finished checking the desired information, press the
Reset key to return to the initial mode.
5-3