Adding A Destination On One Touch Key (One Touch Key) - Kyocera ECOSYS M3645idn Operation Manual

Preparation before Use > Registering Destinations in the Address Book
Adding a Destination on One Touch Key (One Touch
Key)
Assign a new destination (contact or group) to an one touch key. A maximum of 100 destinations can be registered.
NOTE
• Refer to the following for use of One Touch Key.
Specifying Destination (page 5-20)
• You can add One Touch keys and change their settings on Command Center RX.
Registering Destinations (page 2-63)
1
2
Display the screen.
[System Menu/Counter] key > [Address Book/One Touch] > [One Touch Key]
Add One Touch Keys.
1
Select a One Touch Key number (001 to 100) for the destination >
Selecting the [Quick No. Search] key enables direct entry of a One Touch Key number.
Select a One Touch Key with no registered destination.
System Menu/Counter.
Address Book/One Touch - One Touch Key
001 AAA 002 BBB
1
004 005
None None
007 008
None None
010 011
None None
Menu
2
Select a destination (contact or group) to add to the One Touch Key number > [Next]
Selecting [ ] shows the detailed information of the selected destination.
NOTE
Destinations can be sorted or searched by destination name or address number.
Specifying Destination (page 5-20)
3
Enter the One Touch Key name displayed in the send base screen > [Next]
NOTE
Up to 24 characters can be entered.
Refer to the following for details on entering characters.
Character Entry Method (page 11-11)
4
Select [Save].
The destination will be added to the One Touch Key.
2
10:10
003 CCC
006
None
1/9
009
None
012
None
End
3-33
[ ]