Displaying And Clearing Rapid Pvst+ Statistics -- Cli Version - Cisco Nexus 9000 Series Configuration Manual

Configuring Rapid PVST+ Using Cisco NX-OS

Displaying and Clearing Rapid PVST+ Statistics -- CLI Version

To display Rapid PVRST+ configuration information, perform one of the following tasks:
Command
clear spanning-tree counters [interface type
slot/port | vlanvlan-id]
show spanning-tree {vlan vlan-id | interface
{[ethernet slot/port] | [port-channel
channel-number]}} detail
Rapid PVST+ Example Configurations
The following example shows how to configure Rapid PVST+:
switch# configure terminal
switch(config)# spanning-tree port type edge bpduguard default
switch(config)# spanning-tree port type edge bpdufilter default
switch(cnfig)# spanning-tree port type network default
switch(config)# spanning-tree vlan 1-10 priority 24576
switch(config)# spanning-tree vlan 1-10 hello-time 1
switch(config)# spanning-tree vlan 1-10 forward-time 9
switch(config)# spanning-tree vlan 1-10 max-age 13
switch(config)# interface Ethernet 3/1 switchport
switch(config-if)# spanning-tree port type edge
switch(config-if)# exit
switch(config)# spanning-tree port type edge
switch(config-if)# switchport
switch(config-if)# switchport mode trunk
switch(config-if)# spanning-tree guard root
switch(config-if)# exit
switch(config)#
Additional References for Rapid PVST+ -- CLI Version
Related Documents
Related Topic
Layer 2 interfaces
Cisco NX-OS fundamentals
High availability
Displaying and Clearing Rapid PVST+ Statistics -- CLI Version
Cisco Nexus 9000 Series NX-OS Layer 2 Switching Configuration Guide, Release 7.x
Purpose
Clears the counters for STP.
Displays information about STP by interface or
VLAN including BPDUs sent and received.
Document Title
Cisco Nexus 9000 Series NX-OS Interfaces
Configuration Guide
Cisco Nexus 9000 Series NX-OS Fundamentals
Configuration Guide
Cisco Nexus 9000 Series NX-OS High Availability
and Redundancy Guide
113