Configuring Ssh Management Sessions; Configuring Maximum Number Of Ssh Sessions - Cisco ACE-4710-K9 Administration Manual

Configuring SSH Management Sessions

Configuring SSH Management Sessions

Configuring Maximum Number of SSH Sessions

Cisco 4700 Series Application Control Engine Appliance Administration Guide
2-16
The syntax of this command is:
telnet maxsessions max_sessions
The max_sessions argument sets the maximum number of concurrent Telnet
sessions allowed for the associated context. The range is from 1 to 16 Telnet
sessions for the Admin context and from 1 to 4 Telnet sessions for each user
context. The defaults are 16 (Admin context) and 4 (user context).
For example, to configure the maximum number of concurrent Telnet sessions
to 3 in the Admin context, enter:
host1/Admin(config)# telnet maxsessions 3
To revert to the default of 16 Telnet sessions for the Admin context, enter:
host1/Admin(config)# no telnet maxsessions
This section includes the following topics:
Configuring Maximum Number of SSH Sessions
•
Generating SSH Host Key Pairs
•
SSH remote access sessions are established on the ACE per context. You can
create a context, assign an interface and IP address to it, and then log into the ACE
by using SSH to connect to that IP address. This capability allows you to specify
a particular context when accessing the ACE. For details on creating users and
contexts, see the Cisco 4700 Series Application Control Engine Appliance
Virtualization Configuration Guide.
The ACE supports a maximum of 16 concurrent SSH management sessions for the
Admin context and 4 concurrent SSH management sessions for each user context.
To control the maximum number of SSH sessions allowed for each context, use
the ssh maxsessions command in configuration mode. The ACE supports a total
maximum of 256 concurrent SSH sessions.
Chapter 2 Enabling Remote Access to the ACE
OL-11157-01