Displaying Redundancy Information
Displaying FT Tracking Information
Cisco 4700 Series Application Control Engine Appliance Administration Guide
7-54
To display tracking information, use the show ft track command in Exec mode.
The syntax of this command is:
show ft track {detail | status | summary}
The keywords and arguments are:
•
detail—Displays detailed tracking information
status—Displays the current operating status of the peer plus additional
•
information
summary—Displays summary peer information
•
For example, enter:
host1/Admin# show ft track detail
Table 7-6
describes the fields in the show ft track command output.
Table 7-6
Field Descriptions for the show ft track Command Output
Field
Description
FT Group
FT group identifier.
Status
Configured state of the FT group. Possible states are the
in-service or out-of-service state.
Chapter 7
Configuring Redundant ACE Appliances
OL-11157-01