Table of Contents
Advertisement
Chapter A
Upgrading Your ACE Software
Displaying Software Image Information
OL-11157-01
To display the software image on the ACE, use the show version command in
Exec mode. The syntax for this command is:
show version
For example, enter:
host1/Admin# show version
TAC support: http://www.cisco.com/tac
Copyright (c) 1985-2007 by Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained herein are owned by
other third parties and are used and distributed under license.
Some parts of this software are covered under the GNU Public
License. A copy of the license is available at
http://www.gnu.org/licenses/gpl.html.
Software
loader:
Version 0.95
system:
Version A1(7.0) [build 3.0(0)A1(7.999.31)
adbuild_22:46:11-2008/04/
07_/auto/adbure_nightly2/nightly_scimitar-a18-rib/REL_3_0_0_A1_7_999
system image file: (nd)/192.168.65.34/scimitar.bin
Device Manager version 1.0 (0) 20080408:0435
installed license: ACE-AP-VIRT-020 ACE-AP-OPT-LIC-K9
ACE-AP-SSL-10K-K9
Hardware
cpu info:
number of cpu(s): 1
cpu type: Pentium(R)
cpu: 0, model: Intel(R) Pentium(R) 4, speed: 3399.991 MHz
memory info:
total: 6226704 kB, free: 4638636 kB
shared:
kB, buffers: 19300 kB, cached 0 kB
cf info:
filesystem: /dev/hdb2
total: 861668 kB, used: 348552 kB, available: 469344 kB
last boot reason:
reload command by root
configuration register:
switch kernel uptime is 0 days 18 hours 52 minute(s) 58 second(s)
Cisco 4700 Series Application Control Engine Appliance Administration Guide
Displaying Software Image Information
0x1
A-11
Hide quick links:
Advertisement
Table of Contents
