Chapter 7
Configuring Redundant ACE Appliances
Displaying FT Statistics
OL-11157-01
Table 7-4
Field Descriptions for the show ft peer Command Output
(continued)
Field
Description
Rx Error Bytes
Total number of error bytes that the local ACE received from
the peer.
Tx Keepalive
Total number of keepalive packets that the local ACE sent to
Packets
the peer.
Rx Keepalive
Total number of keepalive packets that the local ACE
Packets
received from the peer.
SRG
Status of whether the software version of the local ACE and
Compatibility
the software version of the peer ACE are compatible.
Possible states are the INIT, COMPATIBLE, or
INCOMPATIBLE state.
License
Status of whether the license of the local ACE and the
Compatibility
license of the peer ACE are compatible. Possible states are
the INIT, COMPATIBLE, or INCOMPATIBLE state.
FT Groups
Number of FT groups.
To display peer information, use the show ft stats command in Exec mode. The
syntax of this command is:
show ft stats group_id
The group_id argument displays additional load-balancing statistics (LB
statistics) for the specified group.
For example, enter:
host1/Admin# show ft stats 1
Cisco 4700 Series Application Control Engine Appliance Administration Guide
Displaying Redundancy Information
7-51