Displaying System Processes - Cisco ACE-4710-K9 Administration Manual

Displaying System Processes

Displaying System Processes
Cisco 4700 Series Application Control Engine Appliance Administration Guide
6-6
Chapter 6
Table 6-3 describes the fields in the show environment command output.
Table 6-3 Field Descriptions for the show environment Command
Field
Inlet
Outlet
SIBYTE
HYPERION
CDE0
CDE1
IXP0
IXP1
SSA
To display general information about all of the processes running on the ACE, use the
show processes command. The show processes command displays summary CPU
information for the Intel Pentium processor.
The show processes command is available only to users with an Admin role across
all contexts. The displayed system processes information is at the CPU system level
(the total CPU usage) and is not on a per-context level.
The syntax of this command is:
show processes [cpu | log [details | pid process_id] | memory]
The keywords, arguments, and options are:
cpu—Displays CPU information for the Intel Pentium processor.
•
log—Displays information about process logs.
•
details—Displays process log information for all process identifiers.
•
Viewing ACE Hardware and Software Configuration Information
Description
Inlet flow temperature of the ACE
Outlet flow temperature of the ACE
Temperature of the SiByte 1250 Processor
Temperature of the Hyperion ASIC
Temperature of CDE 0
Temperature of CDE 1
Temperature of the IXP2800 Network Processor
(IXP 0)
Temperature of the IXP2800 Network Processor
(IXP 1)
Temperature of the SSA ASIC
OL-11157-01