Merging The Startup-Configuration File With The Running-Configuration File - Cisco ACE-4710-K9 Administration Manual

Saving Configuration Files
Merging the Startup-Configuration File with the
Running-Configuration File
Cisco 4700 Series Application Control Engine Appliance Administration Guide
5-6
The keywords, arguments, and options are:
running-config—Specifies the running-configuration file currently residing
•
on the ACE in RAM (volatile memory).
startup-config—Specifies the startup-configuration file currently residing
•
on the ACE in Flash memory (nonvolatile memory).
• disk0:—Specifies that the running-configuration file or startup-configuration
file is copied to the disk0: file system.
[path/]filename—(Optional) The path in the disk0: file system. If you do not
•
provide the optional path, the ACE copies the file to the root directory on the
disk0: file system.
For example, to save the running-configuration file to the disk0: file system as
running-config_copy, enter:
host1/Admin# copy running-config disk0:running-config_copy
To merge the contents of the startup-configuration file into the
running-configuration file, use the copy startup-config running-config
command in Exec mode. This command copies any additional configurations
from the startup-configuration file into the running-configuration file. If any
common commands exist in both files, the startup-configuration file overwrites
the attributes in the running-configuration file.
The syntax for the command is:
copy startup-config running-config
For example, enter:
host1/Admin# copy startup-config running-config
Chapter 5 Managing the ACE Software
OL-11157-01