Table of Contents
Advertisement
Chapter 7
Configuring Redundant ACE Appliances
Table 7-2
Field
My State (Cont.)
My Config Priority Priority configured on the FT group in the local ACE.
My Net Priority
My Preempt
Peer State
Peer Config
Priority
Peer Net Priority
Peer Preempt
Peer ID
Last State Change
Time
Running Cfg Sync
Enabled
Running Cfg Sync
Status
Startup Cfg Sync
Enabled
Startup Cfg Sync
Status
No. of Contexts
OL-11157-01
Field Descriptions for the show ft group Command Output
(continued)
Description
FSM_FT_STATE_STANDBY_HOT—Local standby
•
context has all the state information it needs to
statefully assume the active state if a switchover
occurs.
Priority of the FT group equal to the configured priority
minus the priority of the FT tracking failures if any.
Preemption value of the FT group in the local ACE.
Possible values are Enabled or Disabled.
State of the FT group in the remote ACE. For possible state
values, see the
Priority configured for the FT group in the remote ACE.
Priority of the FT group in the remote ACE computed from
the configured priority and the priority of the FT tracking
failures.
Preemption value of the FT group in the remote ACE.
Possible values are Enabled or Disabled.
FT peer identifier.
Time and date that the peer last changed from the active to
standby state, or standby to active state.
Configured state of config sync for the running-config.
Possible values are Enabled or Disabled.
Current status of config sync for the running-config. For
example: Running configuration sync has completed.
Configured state of config sync for the startup-config.
Possible states are Enabled or Disabled.
Current status of config sync for the startup-config. For
example: Startup configuration sync is disabled.
Number of contexts associated with the FT group.
Cisco 4700 Series Application Control Engine Appliance Administration Guide
Displaying Redundancy Information
"My State"
field description.
7-45
Hide quick links:
Advertisement
Table of Contents
