Cisco ACE-4710-K9 Administration Manual page 340

Defining SNMP Communities
SNMP communities are applicable only for SNMPv1 and SNMPv2c. SNMPv3
Note
requires user configuration information such as specifying the role group that the
user belongs to, authentication parameters for the user, authentication password,
and message encryption parameters (see the
The syntax of this command is as follows:
The keywords, arguments, and options are as follows:
•
•
•
For example, to specify an SNMP community called SNMP_Community1, a
member of the Network-Monitor group, with read-only access privileges for the
community, enter:
host1/Admin(config)# snmp-server community SNMP_Community1 group
Network-Monitor
To remove an SNMP community, enter:
host1/Admin(config)# no snmp-server community SNMP_Community1 group
Network-Monitor
Cisco 4700 Series Application Control Engine Appliance Administration Guide
8-30
snmp-server community community_name [group group_name | ro]
community_name—SNMP community name for this system. Enter an
unquoted text string with no space and a maximum of 32 alphanumeric
characters.
group group_name—(Optional) Identifies the role group to which the user
belongs. Enter an unquoted text string with no space and a maximum of
32 alphanumeric characters.
Only network monitoring operations are supported through the ACE
Note
implementation of SNMP. In this case, all SNMP users are
automatically assigned the system-defined default group of
Network-Monitor. For details on creating users, refer to the Cisco
Application Control Engine Module Virtualization Configuration
Guide.
ro—(Optional) Allows read-only access for this community.
Chapter 8 Configuring SNMP
"Configuring SNMP Users" section).
OL-11157-01