Viewing Session Information
Viewing Session Information
Showing Telnet Session Information
Cisco 4700 Series Application Control Engine Appliance Administration Guide
2-24
This section includes the following procedures:
•
Showing Telnet Session Information
Showing SSH Session Information
•
To display information related to the Telnet session, use the show telnet command
in Exec mode. Only the context administrator can view Telnet information
associated with a particular context.
The syntax of this command is:
show telnet [context_name]
The optional context_name argument specifies the name of the context for which
you want to view specific Telnet session information. The context_name argument
is case sensitive.
For example, enter:
host1/Admin# show telnet
Chapter 2
Enabling Remote Access to the ACE
OL-11157-01