Cisco ACE-4710-K9 Administration Manual page 93

Chapter 2 Enabling Remote Access to the ACE
Table 2-2
Table 2-2
Field
SessionID
Remote Host
Active Time
To display the maximum number of enabled Telnet sessions, use the show telnet
maxsessions command in Exec mode. Only context administrators can view
Telnet session information associated with a particular context.
The syntax of this command is:
The optional context_name argument specifies the name of the context for which
you want to view the maximum number of Telnet sessions. The context_name
argument is case sensitive.
For example, enter:
host1/Admin# show telnet maxsessions
Maximum Sessions Allowed is 4
OL-11157-01
describes the fields in the show telnet command output.
Field Descriptions for the show telnet Command
show telnet maxsessions [context_name]
Cisco 4700 Series Application Control Engine Appliance Administration Guide
Description
Unique session identifier for the Telnet session.
IP address and port of the remote Telnet client.
Time since the Telnet connection request was
received by the ACE.
Viewing Session Information
2-25