Cisco ACE-4710-K9 Administration Manual page 11

OL-11157-01
Creating a Tracking and Failure Detection Process for a Host or
Gateway
7-30
Configuring the Gateway or Host IP Address Tracked by the Active
Member
7-30
Configuring a Probe on the Active Member for Host Tracking
Configuring a Priority on the Active Member for Multiple Probes
Configuring the Gateway or Host IP Address Tracked by the Standby
Member
7-32
Configuring a Probe on the Standby Member for Host Tracking
Configuring a Priority on the Standby Member for Multiple Probes
Example of a Tracking Configuration for a Gateway
Configuring Tracking and Failure Detection for an Interface
Creating a Tracking and Failure Detection Process for an Interface
Configuring the Interface Tracked by the Active Member
Configuring a Priority for a Tracked Interface on the Active Member
Configuring the Interface Tracked by the Standby Member
Configuring a Priority for a Tracked Interface on the Standby
Member
7-37
Example of a Tracking Configuration for an Interface
Example of a Redundancy Configuration
Displaying Redundancy Information
Displaying Redundancy Configurations
Displaying FT Group Information
Displaying the IDMAP Table
Displaying the Redundancy Internal Software History
Displaying Memory Statistics
Displaying Peer Information
Displaying FT Statistics
Displaying FT Tracking Information
Clearing Redundancy Statistics
Clearing FT Statistics
Cisco 4700 Series Application Control Engine Appliance Administration Guide
7-38
7-41
7-41
7-41
7-46
7-47
7-47
7-51
7-54
7-58
7-58
Contents
7-31
7-32
7-33
7-33
7-34
7-35
7-35
7-36
7-36
7-37
7-38
7-47
xi