Table of Contents
Advertisement
Example of an SNMP Configuration
rserver host SERVER3
serverfarm host SFARM1
serverfarm host SFARM2
class-map type http loadbalance match-all L7_INDEX-HTML_CLASS
class-map match-all L4_MAX-CONN-VIP_105_CLASS
class-map type management match-any L4_REMOTE-ACCESS-LOCAL_CLASS
class-map type http loadbalance match-all L7_URL*_CLASS
policy-map type management first-match L4_SNMP-REMOTE-MGT_POLICY
policy-map type loadbalance first-match L7_LB-SF_MAX-CONN_POLICY
policy-map multi-match L4_VIP_POLICY
Cisco 4700 Series Application Control Engine Appliance Administration Guide
8-48
ip address 192.168.252.246
inservice
ip address 192.168.252.247
inservice
probe HTTP_PROBE
rserver SERVER1
conn-limit max 3 min 2
inservice
probe HTTP
rserver SERVER2
conn-limit max 500 min 2
inservice
rserver SERVER3
conn-limit max 500 min 2
inservice
2 match http url /index.html
2 match virtual-address 192.168.120.105 any
description Enables SNMP remote management for local users
1 match protocol snmp source-address 192.168.0.0 255.248.0.0
2 match protocol snmp source-addess 172.16.64.0 255.255.252.0
2 match http url .*
class L4_REMOTE-ACCESS-LOCAL_CLASS
permit
class L7_INDEX-HTML_CLASS
serverfarm SFARM1
class L7_URL*_CLASS
serverfarm SFARM2
class L4_MAX-CONN-VIP_105_CLASS
loadbalance vip inservice
loadbalance policy L7_LB-SF_MAX-CONN_POLICY
loadbalance vip icmp-reply
appl-parameter http advanced-options PERSIST-REBALANCE
Chapter 8
Configuring SNMP
OL-11157-01
Hide quick links:
Advertisement
Table of Contents
