Chapter 5
Managing the ACE Software
Copying Files
Copying Files to Another Directory on the ACE
Note
OL-11157-01
This section contains the following topics:
Copying Files to Another Directory on the ACE
•
Copying Licenses
•
Copying a Packet Capture Buffer
•
Copying Files to a Remote Server
•
Copying Files from a Remote Server
•
Copying an ACE Software System Image to a Remote Server
•
To copy a file from one directory in the disk0: file system of Flash memory to another
directory in disk0:, use the copy disk0: command.
To view the content of the running- and startup-configuration files, use the dir
disk0: command.
The syntax for this command is:
copy disk0:[path/]filename1 {disk0:[path]filename2}
The keywords and arguments are:
[path/]filename1—Name of the file to copy. Use the dir disk0: command to
•
view the files available in the disk0: file system. If you do not provide the
optional path, the ACE copies the file from the root directory on the disk0:
file system.
disk0:[path]filename2—The file destination in the disk0: directory of the
•
current context. If you do not provide the optional path, the ACE copies the
file to the root directory on the disk0: file system.
For example, to copy the file called SAMPLEFILE to the MYSTORAGE
directory in the disk0: file system, enter:
host1/Admin# copy disk0:samplefile disk0:MYSTORAGE/SAMPLEFILE
Cisco 4700 Series Application Control Engine Appliance Administration Guide
Using the File System on the ACE
5-15