Displaying System Processes
Table 6-4
Field
PID
State
PC
Start_cnt
TTY
Process
Cisco 4700 Series Application Control Engine Appliance Administration Guide
6-8
Chapter 6
Viewing ACE Hardware and Software Configuration Information
Field Descriptions for the show processes Command
Description
Process identifier.
Process state. Included below is a summary of the
different process state codes that can appear to
describe the state of a process:
D—Uninterruptible sleep (usually I/O related)
•
ER—Error while running
•
NR—Not running
•
R—Running or runnable (on run queue)
•
S—Interruptible sleep (waiting for an event to
•
complete)
T—Stopped, either by a job control signal or
•
because it is being traced
W—Paging
•
•
X—Process is dead
Z—Defunct ("zombie") process, terminated but
•
not reaped by its parent
Current program counter in hex format.
Number of times a process has been started.
Terminal that controls the process. A "—" usually
means a daemon is not running on any particular tty.
Name of the process.
OL-11157-01