Cisco ACE-4710-K9 Administration Manual page 147

Chapter 4 Configuring Class Maps and Policy Maps
•
•
•
•
•
•
•
Table 4-7
Keyword
domain
ftp
ftp-data
http
https
irc
matip-a
nntp
pop2
pop3
OL-11157-01
netmask—(Optional) Subnet mask for the VIP address, specified in dotted
decimal format (for example, 255.255.255.0).
protocol_number—(Optional) Number of an IP protocol. Enter an integer
from 1 to 255 that represents the IP protocol number.
any—Specifies a wildcard value that allows connections from any IP
protocol.
tcp | udp—Specifies the protocol, TCP or UDP.
any—Specifies the wildcard value for the TCP or UDP port number. With any
used in place of either the eq or range values, packets from any incoming port
match.
eq port_number—Specifies that the TCP or UDP port number must match the
specified value. Enter an integer from 0 to 65535. A value of 0 instructs the
ACE to include all ports. Alternatively, you can enter the name of a
well-known TCP port as listed in
listed in Table 4-8.
range port1 port2—Specifies a port range to use for the TCP or UDP port.
Valid port ranges are from 0 to 65535. A value of 0 instructs the ACE to match
all ports.
Well-Known TCP Port Numbers and Keywords
Port Number
53
21
20
80
443
194
350
119
109
110
Cisco 4700 Series Application Control Engine Appliance Administration Guide
Configuring Layer 3 and Layer 4 Class Maps
Table 4-7 or a well-known UDP port as
Description
Domain Name System (DNS)
File Transfer Protocol (FTP)
FTP data connections
Hyper Text Transfer Protocol (HTTP)
HTTP over TLS or SSL (HTTPS)
Internet Relay Chat (IRC)
Mapping of Airline Traffic over Internet
Protocol (MATIP) Type A
Network News Transport Protocol (NNTP)
Post Office Protocol (POP) v2
Post Office Protocol (POP) v3
4-33