Cisco ACE-4710-K9 Administration Manual page 322

SNMP Overview
Table 8-1 SNMP MIB Support (continued)
MIB Support
SNMP-VIEW-BASED-
ACM-MIB
Other MIBs
CISCO-AAA-SERVER-
EXT-MIB
Cisco 4700 Series Application Control Engine Appliance Administration Guide
8-12
Capability MIB
CISCO-SNMP-
VACM-CAPABILITY
CISCO-AAA-
SERVER-EXT-
CAPABILITY
Chapter 8
Description
Provides the View-based Access Control
Model (VACM) for SNMPv3. The SNMPv3
architecture introduces VACM for access
control.
The SNMP-VIEW-BASED-ACM-MIB
specifies objects that are needed to control
access to all MIB data that is accessible
through the SNMP agent. Upon initialization,
the VACM registers as the access control
module with the agent infrastructure. The
VACM implements access control checks
according to several parameters that are
derived from the SNMP message.
The SNMP-VIEW-BASED-ACM-MIB is
described in RFC 3415.
Acts as an extension to
CISCO-AAA-SERVER-MIB. It enhances the
casConfigTable of the
CISCO-AAA-SERVER-MIB to include other
types of server addresses. The
CISCO-AAA-SERVER-EXT-MIB manages
the following configuration functions:
Generic configurations as applied on the
•
authentication and accounting module.
Configuration settings (settings for all the
•
AAA servers instrumented in one
instance of this MIB).
AAA server group configuration.
•
Application-to-AAA function-to-server
•
group mapping configuration.
Configuring SNMP
OL-11157-01