Cisco ACE-4710-K9 Administration Manual page 250

Displaying Technical Support Information
You can save the output of this command to a file by appending > filename to the
Note
show tech-support command (see
you save this file, verify that you have sufficient space to do so; each file may take
about 1.8 MB.
The default output of the show tech-support command includes the output of the
following commands:
•
•
•
•
•
•
The syntax of this command is:
The optional details keyword provides detailed information for each show
command.
For example, to display an excerpt of the current running state of the ACE, enter:
host1/Admin# show tech-support
`show version`
Cisco Application Control Software (ACSW)
TAC support: http://www.cisco.com/tac
Copyright (c) 1985-2007 by Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained herein are owned by
other third parties and are used and distributed under license.
Some parts of this software are covered under the GNU Public
License. A copy of the license is available at
http://www.gnu.org/licenses/gpl.html.
Cisco 4700 Series Application Control Engine Appliance Administration Guide
6-18
Chapter 6
show environment—See the
section
show hardware—See the
show interface—See the Cisco 4700 Series Application Control Engine
Appliance Routing and Bridging Configuration Guide
show process—See the
show running-config—See the
show version—See the
show tech-support [details]
Viewing ACE Hardware and Software Configuration Information
Chapter 5, Managing the ACE
"Displaying ACE Environment Information"
"Displaying Hardware Information"
"Displaying System Processes"
Chapter 5, Managing the ACE Software
"Displaying Software Version Information"
Software). If
section
section
section
OL-11157-01