Displaying System Information - Cisco ACE-4710-K9 Administration Manual

Displaying System Information

Displaying System Information
Cisco 4700 Series Application Control Engine Appliance Administration Guide
6-14
Chapter 6
Table 6-9 Field Descriptions for the show terminal internal info
Command (continued)
Field
Max memory size
Open files
Pipe size
Stack size
CPU time
Max user processes
Virtual memory
To display the system information, use the show system command. The syntax of this
command is:
show system {cpuhog | error-id {hex_id | list} | internal | kmemtrack |
resources | skbtrack | uptime}
The keywords, arguments, and options are:
cpuhog—Displays information related to the process watchdog timer that
•
monitors CPU usage by any currently active processes.
error-id—Displays description about errors.
•
hex_id—The error ID in hexadecimal format. The range is 0x0 to 0xffffffff.
•
list—Specifies all error IDs.
•
• internal—Specifies a series of internal system-level commands for use by
trained Cisco personnel only.
Viewing ACE Hardware and Software Configuration Information
Description
Maximum size (in kbytes) to which a process's
resident set size may grow. This imposes a limit on
the amount of physical memory to be given to a
process.
Maximum number of open files for this process.
Pipe buffer size (in bytes).
Maximum size (in kbytes) of the stack segment for a
process.
Maximum amount of CPU time (in seconds) to be
used by each process
Maximum number of simultaneous processes for the
user identifier.
Maximum amount (in kbytes) of available virtual
memory available to the process.
OL-11157-01