Accessing The Ace Dtd File - Cisco ACE-4710-K9 Administration Manual

Chapter 9 Configuring the XML Interface
R E V I E W D R A F T - C I S C O C O N F I D E N T I A L

Accessing the ACE DTD File

Step 1
Step 2
Step 3
Step 4
OL-11157-01
The ACE DTD file, ace_appliance.dtd, is included as part of the software image
and is accessible from a web browser using either HTTP or HTTPS. The ACE
DTD file, ace_appliance.dtd, is included as part of the software image and is
accessible from a Web browser using either HTTP or HTTPS. To access the
ace_appliance.dtd file, use a Web browser to either:
Directly access the ace_appliance.dtd file.
•
Open the ace_appliance.dtd file from the Cisco ACE appliance Management
•
page.
To access and view the ace_appliance.dtd file, perform the following steps:
If you have not done so, create a Layer 3 and Layer 4 class map and policy map
to classify the HTTP or HTTPS management traffic that can be received by the
ACE. See the "Configuring HTTP and HTTPS Management Traffic Services"
section.
Open your preferred Internet web browser application, such as Microsoft Internet
Explorer or Netscape Navigator.
To directly access the ace_appliance.dtd file, specify the HTTP or secure HTTP
(HTTPS) address of your ACE in the address field, followed by ace_appliance.dtd.
For example:
https://ace_ip_address/ace_appliance.dtd
http://ace_ip_address/ace_appliance.dtd
You can choose to either open the ace_appliance.dtd file or save it to your
computer.
To access the ace_appliance.dtd file from the Cisco ACE appliance Management
page, perform the following procedure:
Specify the HTTP or secure HTTP (HTTPS) address of your ACE in the address
a.
field:
https://ace_ip_address
http://ace_ip_address
Cisco 4700 Series Application Control Engine Appliance Administration Guide
Accessing the ACE DTD File
9-27