Table of Contents
Advertisement
Class Map and Policy Map Configuration Quick Start
Table 4-3
Task and Command Example
6.
Table 4-4
a Layer 3 and Layer 4 traffic policy map and to apply the policy to one or all of
the VLAN interfaces associated with the context. Each step includes the CLI
command required to complete the task.
Cisco 4700 Series Application Control Engine Appliance Administration Guide
4-16
Layer 7 Class Map Configuration Quick Start (continued)
(Optional) Create one or more class maps to be used for the inspection of
FTP commands.
After you create a class map, you will enter FTP inspection class map
configuration mode.
host1/Admin(config)# class-map type ftp inspect match-any
FTP_COMMAND_INSPECT_L7_CLASS
host1/Admin(config-cmap-ftp-insp)# description FTP command
inspection of incoming traffic
host1/Admin(config-cmap-ftp-insp)# match request-method cdup
host1/Admin(config-cmap-ftp-insp)# match request-method get
host1/Admin(config-cmap-ftp-insp)# match request-method stou
host1/Admin(config-cmap-ftp-insp)# match request-method put
host1/Admin(config-cmap-ftp-insp)# exit
provides a quick overview of the steps required to create and configure
Chapter 4
Configuring Class Maps and Policy Maps
OL-11157-01
Hide quick links:
Advertisement
Table of Contents
