Table of Contents
Advertisement
Chapter 1
Setting Up the ACE
Table 1-2
Field
Peer IP Address
Serv/Peer
For example, to display a summary of all peers, enter:
switch/Admin# show ntp peers
Table 1-3
Table 1-3
Field
Peer IP Address
Serv/Peer
For example, to display the NTP input/output statistics, enter:
switch/Admin# show ntp statistics io
Table 1-4
Table 1-4
Field
Time since reset
Receive buffers
Free receive buffers
Used receive buffers
Low water refills
OL-11157-01
Field Descriptions for the show ntp peer-status Command
Description
IP address of each associated peer
Indication of whether the peer functions as an NTP
server or NTP peer
describes the fields in the show ntp peers command output.
Field Descriptions for the show ntp peers Command
Description
The IP address of each associated peer
Indicates whether the peer functions as an NTP server
or NTP peer
describes the fields in the show ntp statistics io command output.
Field Descriptions for show ntp statistics io Command
Description
Time since the last reset of the NTP software on the
primary server
Total number of UDP client-receive buffers
Current number of available client-receive buffers
Current number of unavailable client-receive buffers
Total number of times buffers were added, which also
indicates the number of times there have been low
memory resources during buffer creation
Cisco 4700 Series Application Control Engine Appliance Administration Guide
Synchronizing the ACE with an NTP Server
1-25
Hide quick links:
Advertisement
Table of Contents
