Defining Snmp Protocol Match Criteria - Cisco ACE-4710-K9 Administration Manual

Application control engine appliance
Table of Contents

Advertisement

Chapter 8
Configuring SNMP

Defining SNMP Protocol Match Criteria

OL-11157-01
For example, to specify a description that the class map is to allow SNMP access,
enter:
host1/Admin(config)# class-map type management SNMP-ALLOW_CLASS
host1/Admin(config-cmap-mgmt)# description Allow SNMP access
To remove the description from the class map, enter:
host1/Admin(config-cmap-mgmt)# no description
Use the match protocol snmp command to configure the class map to specify
SNMP can be received by the ACE and an NMS. You configure the associated
policy map to permit SNMP access to the ACE. As part of the network
management access traffic classification, you also specify either a client source
host IP address and subnet mask as the matching criteria or instruct the ACE to
allow any client source address for the management traffic classification.
Access the class map management configuration mode to specify the match
protocol snmp command.
The syntax of this command is as follows:
[line_number] match protocol snmp {any | source-address ip_address
mask}
The keywords, arguments, and options are as follows:
line_number—(Optional) Allows you to edit or delete individual match
commands. Enter an integer from 2 to 255 as the line number. For example,
you can enter no line_number to delete long match commands instead of
entering the entire line.
snmp—Specifies Simple Network Management Protocol (SNMP).
any—Specifies any client source address for the management traffic
classification.
source-address—Specifies a client source host IP address and subnet mask
as the network traffic matching criteria. As part of the classification, the ACE
implicitly obtains the destination IP address from the interface on which you
apply the policy map.
ip_address—Source IP address of the client. Enter the IP address in
dotted-decimal notation (for example, 192.168.11.1).
Cisco 4700 Series Application Control Engine Appliance Administration Guide
Configuring SNMP Management Traffic Services
8-41

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

4700 series

Table of Contents