Using the QuickStart Wizard with a Configured Appliance
Using the QuickStart Wizard with a Configured
Appliance
Cisco 11000 Series Secure Content Accelerator Configuration Guide
3-14
If you wish to run the QuickStart wizard for a previously configured Cisco Secure
Content Accelerator, follow these steps:
Initiate a management session and start the configuration manager as
1.
described previously.
2.
Use the appropriate method to attach to the device.
Enter Privileged mode.
3.
Enter the command quick-start.
4.
5.
Go to "Using the QuickStart Wizard".
Chapter 3
Using the QuickStart Wizard
78-13124-06