Keepalive Maxfailure; Key - Cisco CSS11501S-C-K9 Configuration Manual

Appendix C Command Summary
Usage Guidelines
Related Commands

keepalive maxfailure

Syntax Description
Usage Guidelines
Related Commands

key

Syntax Description
78-13124-06
Availability: Serial, Telnet; FIPS Mode (serial only)
keepalive enable (Server Configuration Command Set)
keepalive maxfailure (Server Configuration Command Set)
Specifies the number of failed keepalive responses before the virtual server is set
to "suspended".
keepalive maxfailure <count>
count
Availability: Serial, Telnet; FIPS Mode (serial only)
keepalive enable (Server Configuration Command Set)
keepalive frequency (Server Configuration Command Set)
Sets the specified key for use by the server.
key <keyname | default | default-1024 | default 512>
keyname
default
default-1024
default-512
Cisco 11000 Series Secure Content Accelerator Configuration Guide
The number of failed keepalive message responses;
the range is 1 to 10 (inclusive); the default is 3
The name of the key.
The pre-loaded default key.
The pre-loaded 1024-bit default key.
The pre-loaded 512-bit default key.
Configuration Command Set
C-177