Key Configuration Command Set; Binhex; Der - Cisco CSS11501S-C-K9 Configuration Manual

Appendix C Command Summary

Key Configuration Command Set

binhex

Syntax Description
Usage Guidelines

der

Syntax Description
Usage Guidelines
78-13124-06
Use Key Configuration commands to set up and manage keys. Enter Key
Configuration mode by using the enable command in Non-Privileged mode, the
configure command in Privileged mode, the ssl command in Configuration mode,
and the key command in SSL Configuration mode. The prompt changes to
<config-ssl-key[keyname]>>
Allows a binary hex-encoded X.509 key to be pasted into the configuration
manager.
binhex [value]
value
Availability: Serial, Telnet; FIPS Mode (serial only)
After the command is entered, you are prompted to paste the key from the cut
buffer. You can use a text editor to copy the key from a file. After the key is pasted,
you must press Enter twice to complete the command.
Loads a DER-encoded X509 key file into the current key object.
der [url]
url
Availability: Serial, Telnet; FIPS Mode (serial only)
If you do not enter the URL, you are prompted for it. If a password is required,
you are prompted for it.
Cisco 11000 Series Secure Content Accelerator Configuration Guide
.
The key that has been copied into the cut buffer.
The location of the file.
Configuration Command Set
C-145