Syslog - Cisco CSS11501S-C-K9 Configuration Manual

Appendix C Command Summary
Usage Guidelines
Related Commands

syslog

Syntax Description
Usage Guidelines
78-13124-06
Availability: Serial, Telnet; FIPS Mode (serial only)
show ssl (Non-Privileged Command Set)
show ssl cert (Non-Privileged Command Set)
show ssl certgroup (Non-Privileged Command Set)
show ssl cert (Non-Privileged Command Set)
show ssl errors (Non-Privileged Command Set)
show ssl key (Non-Privileged Command Set)
show ssl secpolicy (Non-Privileged Command Set)
show ssl server (Non-Privileged Command Set)
show ssl statistics (Non-Privileged Command Set)
See the section "SSL Configuration Command Set".
Adds the specified IP address to the syslog list for the device.
syslog <ipaddr> [port <portid>][facility <facilityid>]
no syslog <ipaddr>
ipaddr
port
portid
facility
facilityid
Availability: Serial, Telnet; FIPS Mode (serial only)
Cisco 11000 Series Secure Content Accelerator Configuration Guide
The IP address of the device to receive syslog
messages.
Keyword indicating that a specific TCP port should be
used for syslog communications.
The TCP port to be used.
Keyword indicating a specific syslog facility should be
used.
A numeral (from 0 to 7, inclusive) specifying the
syslog facility to be used.
Configuration Command Set
C-105