Command Changes; Unavailable Commands; Differing Command Behaviors; Table 6-1 Unavailable Commands - Cisco CSS11501S-C-K9 Configuration Manual

Chapter 6 FIPS Operation

Command Changes

Unavailable Commands

Differing Command Behaviors

78-13124-06
When the device is operated in FIPS Mode, some commands are unavailable or
behave differently than in normal operating modes.
Commands are unavailable in FIPS Mode are shown in Table 6-1, below.
Table 6-1 Unavailable Commands
Operational Mode
Top Level Mode
Configuration Mode
Some commands behave differently while the Secure Content Accelerator is in
FIPS Mode. These commands and notes about their usage are presented in
Table 6-2, below.
Cisco 11000 Series Secure Content Accelerator Configuration Guide
Command
show telnet, show web-mgmt, write file
telnet access-list, telnet enable, telnet port,
web-mgmt access-list, web-mgmt enable,
web-mgmt port
Command Changes
6-7