Cisco CSS11501S-C-K9 Configuration Manual page 215

Appendix C Command Summary
Table C-7
Command
server, page 122
tcp-tuning, page 122
Table C-8
Command
activate, page 124
certgroup serverauth,
page 124
end, page 125
exit, page 125
finished, page 125
help, page 126
info, page 126
ip address, page 126
keepalive enable, page 127
keepalive frequency,
page 127
78-13124-06
SSL Configuration Command Description (continued)
Description
Creates and/or configures the specified standard
secure server and enters Server Configuration mode
for that server.
Enters TCP Tuning Configuration mode at the global
level.
Backup-Server Configuration Command Description
Description
Activates the current suspended backend server if
enough information has been configured
Assigns a certificate group to be used for server
certificate authentication.
Exits Backend Server Configuration mode, activates
all changes, and returns to SSL Configuration mode.
Exits Backend Server Configuration mode, activates
all changes, and returns to SSL Configuration mode.
Leaves Backend Server Configuration Mode and
returns to Top Level mode.
Displays help information for the specified
command.
Displays current information about the logical
secure server being edited or created.
Sets the specified IP address for the backend server.
Allows keepalive messages to be sent to the
hardware server corresponding to the current virtual
backend server.
Specifies the interval between keepalive messages.
Cisco 11000 Series Secure Content Accelerator Configuration Guide
Command Listing
C-21