Top Level Command Set
Usage Guidelines
Note
Related Commands
exit
Usage Guidelines
Related Commands
help
Syntax Description
Cisco 11000 Series Secure Content Accelerator Configuration Guide
C-32
Availability: Serial, Telnet; FIPS Mode (serial only)
If an enable-level password has been defined, you must enter it when prompted.
Using the no form of this command leaves Privileged mode.
If you have forgotten the device's enable password, see "Factory
Default Reset Password".
See the section "Privileged Command Set".
Quits the configuration manager.
exit
Availability: Serial, Telnet; FIPS Mode (serial only)
When executed from a serial connection, the connection is not closed. If an access
password has been configured, you are prompted for it. When executed from
telnet, the telnet connection is closed.
quit (Non-Privileged Command Set)
Displays help information for the specified command.
help [command]
command
The name of the command.
Appendix C
Command Summary
78-13124-06