Cisco CSS11501S-C-K9 Configuration Manual page 211

Appendix C Command Summary
Table C-5
Command
finished, page 86
help, page 87
hostname, page 87
interface, page 88
ip address, page 88
ip domain-name, page 89
ip name-server, page 89
ip route, page 90
ip route default, page 91
keepalive-monitor, page 91
mode one-port, page 92
mode pass-thru, page 92
password, page 92
rdate-server, page 93
registration-code, page 94
rip, page 94
no snmp, page 95
78-13124-06
Configuration Command Description (continued)
Description
Leaves Configuration Mode and returns to Top Level
mode.
Displays help information for the specified
command.
Sets the identification name for the current Secure
Content Accelerator.
Enters Interface Configuration mode for the
specified Ethernet interface of the current device.
Sets the IP address for the current Secure Content
Accelerator.
Adds a DNS suffix to the list to append for
resolution of unqualified names.
Sets the one or more name servers to use with the
device.
Adds a static route entry for the specified destination
IP address to the device routing table.
Sets the default route for the current device.
Indicates that SSL errors from the specified IP
address are to be ignored
Enables secure and non-secure traffic to pass
through the single "Network" Ethernet port.
Enables pass through of non-SSL traffic. This is the
default configuration
Sets the access- or enable-level password for the
current device or sets the idle timeout period.
Specifies and RDATE-protocol server to be used for
date and time information on the device.
Stores the registration code of the device.
Enables Routing Interface Protocol (RIP) for the
current device.
Disables SNMP and clears all SNMP data.
Cisco 11000 Series Secure Content Accelerator Configuration Guide
Command Listing
C-17